王英杰,赵惠峰,谭建波,赵宇强

• 1:河北科技大学材料科学与工程学院
• 2:邯郸中材建设有限公司办公室
• 3:河北科技大学材料科学与工程学院
• 4:中国核工业第23建设公司 河北石家庄050054

摘要(Abstract)：

介绍了倾斜冷却板法制备半固态合金流程短、成本低、设备简单、生产效率高,同时又能生产较大尺寸的半固态坯料等的特点,指出了倾斜冷却板法制备半固态合金的原理及其影响因素,并阐述了倾斜冷却板法在半固态加工中的应用及其应用前景。

关键词(KeyWords)： 冷却板法;半固态加工;半固态合金

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 王英杰,赵惠峰,谭建波,赵宇强

参考文献(References)：

• [1]FLEMING M C.Behavior of alloy in the semi-solid state[J].Metallurgical Transactions B,1991,22B(5):269-293.
• [2]APELIAN D.Semi-solid processing routes and microstructureevolution[A].Proceedings of the 7th International ConferenceSemi-Solid Processing of Alloys and Composites[C].Tsukuba:Japan Society for Technology of Plasticity,2002.
• [3]谢水生,黄声宏.半固态金属加工技术及其应用[M].北京:冶金工业出版社,1999.
• [4]KIUCHI M,SUGIYAMA S.A new process to manufacturesemisolid alloys[J].ISIJ International,1995,35(6):790-793.
• [5]江运喜,谢水生.半固态金属浆料制备新技术[J].锻压技术,2003,(6):41-47.
• [6]MOTEGI T.Continuous casting of semisolid Al-Si-Mg alloy[J].Proc of the ICAA-6,1998,(2):236-297.
• [7]GRIMMIG T,FEHLBIER M.Approaches to the production ofsemi-solid aluminum in the rheocasting process[A].Proceed-ings of the 7th International Conference Semi-solid Processingof Alloys and Composites[C].Tsukuba:Japan Society forTechnology of Plasticity,2002.
• [8]蔡卫华,杨湘杰.斜管法流变制浆设备工艺参数的研究[J].南昌大学学报,2003,25(3):13-17.
• [9]TOSHIO H,KAPRANOS P.Microstructure at semisolid con-dition of aluminum alloy strip cast using at twin roll casterp[A].Processing of the 7th International Conference Semi-solidProcessing of Alloys and Composites[C].Tsukuba:Japan So-ciety for Technology of Plasticity,2002.
• [10]TOSHIO H,KAPRANOS P.Thixoforming processing in gotcastby a cooling slope and low super heat casting[A].Pro-ceedings of the 7-th International Conference Semi-solid Pro-cessing of Alloys and Composites[C].Tsukuba:Japan Societyfor Technology of Plasticity,2002.
• [11]MOTEGI T.On solidification processing[J].InternationalJournal Cast Metals Research,1997,(7):7-10.
• [12]MOTEGI T.Continuous casting of semi-solid Mg-9%Al-1%Zn alloy[A].Proceedings of the 7 th International ConferenceSemi-solid Processing of Alloys and Composites[C].Tsuku-ba:Japan Society for Technology of Plasticity,2002.
• [13]管仁国,李罡,李俊鹏,等.倾斜式剪切冷却制备1Cr18Ni9Ti不锈钢半固态材料[J].东北大学学报,2005,26(9):867-870.
• [14]管仁国,李俊鹏,石路,等.倾斜式冷却剪切制备半固态Al-Mg合金[J].东北大学学报,2005,26(5):448-451.
• [15]田辺郁,茂木?一.傾斜冷却板を用いたセミソリッドAC4CHアルミニウム合金の連続鋳造[J].銅と銅合金,2004,43(1):177-182.
• [16]TANABE F.Continuous casting of semi-solid AC4CH alumi-num alloy produced using an inclined cooling plate[J].Journalof the Japan Institute of Metals,2003,67(6):291-294.
• [17]戴安国,邢书明.倾斜冷却半固态连铸A356铝合金过程稳定性研究[J].铸造,2006,(3):239-241.
• [18]张海英.半固态铝合金熔体充型能力的影响规律的研究[D].北京:北京交通大学土木建筑工程学院,2005.
• [19]MUUMBO A,NOMURA H.Casting of semi-solid cast ironslurry using combination of cooling slope and pressurization[J].International Journal Cast Metals Research,2004,(1):39-46.
• [20]矢野英治,和田典也.傾斜冷却板を用いたAZ91Dマグネシウム合金の半溶融鋳造[J].日本金属学会誌,2002,66(11):1 131-1 134.
• [21]TOSHIO H.Semi-solid strip casting using a twin roll castingequipped with a cooling slope[J].Journal of Materials Pro-cessing Technology,2002,(11):558-561.